StafixOFFSET

Download PDF Version

Stafix®, a sticker without glue. The Stafix® film has a permanent static charge stored inside. The static charge produces an adhesion force, which makes the film adhere to almost any surface from both, the printed and the unprinted, side.

PRODUCT DESCRIPTION

Stafix® is a printable electrically charged polypropylene film, glued to a cardboard backer.

Stafix® consists of two layers:

  • 50 microns thick, polypropylene film (Top layer)
  • 200 g/m2 cardboard backer. (Bottom layer)

The cardboard backer is single coated from the film side and uncoated from the backside. Stafix® is available in White and Clear.

PRODUCT SPECIFICATIONS

PROCESSING

Stafix® is printable with sheet-fed offset printing machines, with oxidative or UV-curable inks. It can also be die-cut, kiss-cut and perforated.

FORMATS

Stafix® sheets (white and clear) are currently available in the following formats:

  • 320x450mm
  • 480x650mm
  • 707x1000mm

CUSTOM ORDERS

Custom size sheets are possible; for larger quantities, cost efficiency can be achieved by producing tailored size sheets. Please consult us regarding minimum quantities.

ENVIRONMENT

Stafix® film is 100% recyclable and doesn’t release toxic gases to the environment if incinerated. The cardboard used for the backer is PEFC certified.

PACKAGING SIZES

For all formats:

  • Test kits of 200 sheets
  • Pallets of 2000 sheets bulk
  • Pallets of 2000 sheets ream wrapped (10 reams of 200 sheets)

STORAGE AND SHELF LIFE

Unprinted Stafix® sheets can be stored up to 12 months. Stafix® should be stored inside at room temperature from 18 to 27 °C with a relative humidity level between 25 and 50%.

Printed Stafix® material can be stored for 12 months. It is important to store the materials, in the above-mentioned conditions, in e.g. a carton box safe from dust and excess humidity.

USE & INSTALLATION

Stafix® adheres on average for 3 months to almost any surface, depending on how clean and even the surface is. The less Stafix® is repositioned, the longer it stays. Stafix® adheres from both the unprinted and the printed side and is bubble free. Stafix® is recommended for temporary indoor use. It can also be utilized outdoors for a short period of time. Avoid placing Stafix® onto freshly painted walls, the VOC’s emitted by the fresh-paint reduces the static charge of the film.